Description

Select Schluter-QUADEC according to tile thickness.
Using a notched trowel, apply thin-set mortar to the area where profile is to be placed. If Schluter-QUADEC is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.
Press the perforated anchoring leg of profile into the mortar and align.
Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32” (1 mm) lower.
Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16″ – 1/8″ (1.5 – 3 mm). With the stainless steel profiles, leave a space of approximately 1/16″ – 1/8″ (1.5 – 3 mm).
Fill the joints completely with grout or setting material.
Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminium surfaces.
Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner.

Quadec

Schluter®-QUADEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features an anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a square outer corner along the surface edge. QUADEC allows for modern decorative design and interesting contrasts. The integrated joint spacer forms a defined joint cavity with the tile.

This product is currently out of stock and unavailable.

SKU: 67ded051d660 Category: