Rondec Step

Starting at 26.09$

Schluter-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The profile features an anchoring leg, which is secured in the mortar bond coat beneath the tile. The top of the profile features a symmetrically rounded edge with 1/4″ (6 mm) radius, which matches the Schluter-RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly. In addition, the profile effectively protects tiles in the edge area from mechanical and impact stresses. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

SKU: N/A Category:


Select Schluter-RONDEC-STEP according to tile thickness.
Using a notched trowel, apply thin-set mortar to the area where profile is to be placed.
Press the perforated anchoring leg of profile into the mortar and align.
Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32″ (1 mm) lower.
Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16″ – 1/8″ (1.5 – 3 mm).
Fill the joint completely with grout or setting material.
Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.
Note: Matching corners are available for RONDEC-STEP.